# Conect sensor 0s0-32 

**URL:** <https://community.ouster.com/t/conect-sensor-0s0-32/421>\
**Category:** Hardware\
**Tags:** sdk, mapping\
**Created:** [November 21, 2025, 4:30pm UTC](https://community.ouster.com/t/conect-sensor-0s0-32/421 "2025-11-21T16:30:18Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Silvinah91](https://yyz2.discourse-cdn.com/flex004/user_avatar/community.ouster.com/silvinah91/32/254_2.png) [@Silvinah91](https://community.ouster.com/u/Silvinah91)\
**Post date:** [November 21, 2025, 4:30pm UTC](https://community.ouster.com/t/conect-sensor-0s0-32/421/1 "2025-11-21T16:30:18Z")

</div>

Hello, I don’t know how to place and configure my sensor, I need to look at an area of the warehouse to detect and measure pallets! Could someone help me with this?

---

<div class="post-metadata">

**Author:** ![alex\_chua](https://avatars.discourse-cdn.com/v4/letter/a/dbc845/32.png) [@alex\_chua](https://community.ouster.com/u/alex_chua)\
**Post date:** [November 24, 2025, 3:00am UTC](https://community.ouster.com/t/conect-sensor-0s0-32/421/2 "2025-11-24T03:00:21Z")

</div>

@Silvinah91 Welcome to the Ouster community!

To detect and measure pallets using an OS0-32:

- Configuration
  - You can configure the sensor through the web interface at:
    - http://\<sensor\_ip\>

  - You can set Lidar Mode: 2048x10 (higher resolution = denser data)

- Visualizing and Testing
  - To confirm the coverage:
    - Use Ouster Studio or simple-viz to view the point cloud
    - Place a pallet in the area and check whether the top edges and corners are clearly visible
    - Adjust tilt angle and mounting height if needed

Hope this helps for your very first step