# Assistance Needed with Network Configuration and Connectivity Issue **URL:** \ **Category:** Software\ **Tags:** vlp-16\ **Created:** [January 15, 2025, 7:11am UTC](https://community.ouster.com/t/assistance-needed-with-network-configuration-and-connectivity-issue/266 "2025-01-15T07:11:38Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![dearjane](https://avatars.discourse-cdn.com/v4/letter/d/ba9def/32.png) [@dearjane](https://community.ouster.com/u/dearjane)\ **Post date:** [January 15, 2025, 7:11am UTC](https://community.ouster.com/t/assistance-needed-with-network-configuration-and-connectivity-issue/266/1 "2025-01-15T07:11:38Z")
Hello, I have configured my IP address to 192.168.1.66 with a subnet mask of 255.255.255.0 according to the documentation. However, I am unable to access 192.168.1.201. Please refer to the attached Wireshark capture below for more details.（my device is vlp16） Could you please help me resolve this issue? Thank you! ![1](https://canada1.discourse-cdn.com/flex004/uploads/ouster/original/1X/103d1d2c55e7e933c96266ff0d28494bf1aeec41.png) ---
**Author:** ![jlg](https://yyz2.discourse-cdn.com/flex004/user_avatar/community.ouster.com/jlg/32/67_2.png) [@jlg](https://community.ouster.com/u/jlg)\ **Post date:** [January 15, 2025, 1:13pm UTC](https://community.ouster.com/t/assistance-needed-with-network-configuration-and-connectivity-issue/266/2 "2025-01-15T13:13:16Z")
Note that the sensor is on a different subnet (192.168.2.xxx). ![image](https://canada1.discourse-cdn.com/flex004/uploads/ouster/original/1X/f8df4f614a1f4347391b9a536558d4f9389f3118.jpeg) If you want to change the sensor IP address to the default value, switch your ethernet port to 192.168.2.66, access the sensor web page at 192.168.2.201, and change it to 192.168.1.201. At that point switching back to your original network values will work.